Electronic heat cost allocator E-ITN 10.7

According to the new directive 2018/2020/EU are required remote readings. From 15th October 2020 newly installed heat cost allocators need to allow remote reading of data. Therefore we have ceased the production of E-ITN 10 allocators.

Data reading

Measured data can be read via mobile reading unit IRU 10. Reading procedure is very simply and can be made e.g. by building administrator.

User control

Every user can control current value during actual billing period and archive value for past billing period on LC display.


  1. current value in actual billing period
  2. archive value for past billing period
  3. control alphanumerical code
  4. first part of allocator serial number
  5. second part of allocator serial number

Protection against cheating

When thermally influenced, allocator is switched to single-sensor mode. Allocator is switched back to standard two-sensor mode when thermal influence is finished. Consumption values and radiator temperatures for past 12 months can be read from the allocator memory via infra-red interface.  

Application

E-TIN 10.7 is intended to be installed in one-tube horizontal/vertical and two-tube heating systems with the lowest mean design heating medium temperature ≥ 35 °C and highest mean design heating medium temperature ≤ 90 °C.

Technical data

Measuring principle two-sensor measuring principle
Conditions for measuring temperature of the sensor of the radiator temperature ≥ 23 °C
difference of surroundings temperature and mean temperature of heating medium ≥ 4 °C
Resulting rating factor K K = 1
Calendar functions
value for past year,
for past 12 months: month consumption value, min., aver. and max. radiator temperature, number of heating days
Data imaging 5-dial LC display + 2 special symbols
Data reading visually, infra-red interface
Protection against cheating continuous control of surroundings temperature, if the thermal influence is detected, allocator is switched to single-sensor mode
Data backup daily backup of measured values including real time
Function control automatic, can be activated and controlled by user
Dimensions 97 x 36 x 22,5 mm
Power supply lithium battery 3,0 V
Material ABS + PC / Al - F22
IP code IP 42
Conformity EN 834

Dimensional drawings

Possibilities of back plates

Do you need help? Contact us!